• TEL:



    Product Center

    Product Detail

    Production line-002

    No price
    Product description

    The taker in roller is mainly composed of cylinder 1 and coating (saw blade). The cylinder body has two kinds of welding structures, namely cast iron and steel plate. The cylinder body is covered with metal card clothing. Both ends of the cylinder body are fixed on the taker in roller shaft with plug 4 (flange plate) and taper sleeve 3. There are trapezoidal grooves with large groove bottom and small notch along the inner circumference of the plug. The balance iron screw can move along the whole circumference of the groove. When checking the balance, the balance iron 5 can be fixed at the required position. After balancing, install the insert cover 2 to close the cylinder.

    Due to the high speed of the taker in roller and the small distance between the adjacent parts, there are higher requirements for the roundness of the taker in roller cylinder and the needle tooth surface, the concentricity of the cylinder needle tooth surface and the licker shaft, and the static and dynamic balance of the whole taker in roll.

    Copyright @ 2019 . All rights reserved.   備案號189716271273

    contact information

    Service call:133-2512-2131

    Jinan xinjinlong Machinery Co., Ltd

    • Telephone

    Technical Support: 卓博科技 | Admin Login